1-4
10
x
Using the joystick
1 Display the main MENU and select the menu you
want to adjust.
Press the joystick once to display the main MENU. Then
move the joystick up, down, left, or right to highlight the
desired menu. Press the joystick to select the menu item.
2 Adjust the menu.
Move the joystick up, down, left, or right to make the
adjustment.
3 Close the menu.
Press the joystick once to return to the main menu, and twice
to return to normal viewing. If no buttons are pressed, the
menu closes automatically after about 30 seconds.
x
Resetting the adjustments
Press the RESET button. See page 15 for more information on
resetting the adjustments.
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for the signals from the
currently selected input connector.
1 Move the joystick in any direction.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
2 Move the joystick up or down to adjust the
brightness (
), and left or right to adjust the
contrast (
6
).
If you select the sRGB mode in the COLOR menu
Confirm that the brightness (
) and contrast (
6
) values are
adjusted respectively to the numbers to be set in the sRGB mode
shown in the BRIGHTNESS/CONTRAST menu. If not, press the
RESET button (for less than 2 seconds).
For more information about using the sRGB mode, see
ìAdj usting the color of the picture (COLOR)î on page 11.
The menu automatically disappears after about 3 seconds.
b
b
RESET
2 6
2 6
BR I GHTNESS / CONTRAS T
5 6
7 6
s RGB
:
5 6
7 6
BR I GHTNESS / CONTRAS T
Values to be set
in the sRGB
mode
11
GB
Adjusting the centering of the
picture (CENTER)
This setting is stored in memory for the current input signal.
1 Press the joystick.
The main MENU appears on the screen.
2 Move the joystick to highlight
CENTER and
press the joystick again.
The SIZE/CENTER menu appears on the screen.
3 First move the joystick up or down to select
for
horizontal adjustment, or
for vertical adjustment.
Then move the joystick left or right to adjust the
centering.
Adjusting the size of the picture
(SIZE)
This setting is stored in memory for the current input signal.
1 Press the joystick.
The main MENU appears on the screen.
2 Move the joystick to highlight
SIZE and press the
joystick again.
The SIZE/CENTER menu appears on the screen.
3 First move the joystick up or down to select
for
horizontal adjustment, or
for vertical
adjustment. Then move the joystick left or right to
adjust the size.
Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1 Press the joystick.
The main MENU appears on the screen.
2 Move the joystick to highlight
SIZE or
CENTER and press the joystick again.
The SIZE/CENTER menu appears on the screen.
3 Move the joystick up or down to select
(zoom),
and move the joystick left or right to enlarge or
reduce the picture.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
Adjusting the shape of the picture
(GEOM)
The
(rotation) setting is stored in memory for all input signals.
All other settings are stored in memory for the current input
signal.
1 Press the joystick.
The main MENU appears on the screen.
2 Move the joystick to highlight
GEOM and press
the joystick again.
The GEOMETRY menu appears on the screen.
3 First move the joystick up or down to select the
desired adjustment item. Then move the joystick left
or right to make the adjustment.
Adjusting the color of the picture
(COLOR)
The COLOR settings allow you to adjust the pictureís color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitorís color to a printed pictureís colors.
1 Press the joystick.
The main MENU appears on the screen.
2 Move the joystick to highlight
COLOR and press
the joystick again.
The COLOR menu appears on the screen.
3 Move the joystick left or right to select the
adjustment mode.
There are three types of adjustment modes, EASY, EXPERT,
and sRGB.
Adjust the selected mode according to the instructions on the
next page.
You can set the color temperature in EASY or EXPERT mode
for each of the video input connectors.
Select
To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the
screen
(continued)
