English
English-9
OSD LOCK OUT:
This control completely locks out access to all OSD contrl functions except for
BRIGHTNESS and CONTRAST adjustments. When attempting to activate OSD controls while in the Lock
Out mode, a screen will appear indicating the OSD controls are locked out. To activate the OSD Lock Out
function, press SELECT, then “+” key and hold down simultaneously. To de-activate the OSD Lock Out,
press SELECT, then “+” key and hold down simultaneously.
HOT KEY:
You can adjust the brightness and contrast directly. When this function is set to ON, you can
adjust the brightness with
or
, contrast with + or - key, while the OSD menu is off.
FACTORY PRESET:
Selecting Factory Preset allows you to reset all OSD control settings back to the
factory settings. The RESET button will need to be held down for several seconds to take effect. Individual
settings can be reset by highlighting the control to be reset and pressing the RESET button.
Information
DISPLAY MODE:
Provides information about the current resolution display and technical data including the
preset timing being used and the horizontal and vertical frequencies. Increases or decreases the current
resolution.
MONITOR INFO.:
Indicates the model and serial numbers of your display.
OSD Warning
OSD Warning menus disappear with Exit button.
NO SIGNAL:
This function gives a warning when there is no Horizontal or Vertical Sync. After power is
turned on or when there is a change of input signal, the
No Signal
window will appear.
RESOLUTION NOTIFIER:
This function gives a warning of use with optimized resolution. After power is
turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the
Resolution Notifier
window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE:
This function gives a recommendation of the optimized resolution and refresh rate. After
the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing,
the
Out Of Range
menu will appear.
Controls
- Continued
