Silicon Graphics CHALLENGE L, Руководство пользователя, Страница: 25 / 164

Operating Considerations
9
will maintain a log with the last error message(s) received before the
shutdown.
Chapter 2 shows the location of the System Controller’s front panel on the
chassis. Figure 3-4 in Chapter 3 identifies its related control buttons. To
understand and use the System Controller, see “Using the System
Controller” in Chapter 5.
Operating Considerations
This section covers the basic requirements for physical location to ensure
proper chassis operation.
The Challenge deskside chassis is designed to fit into a typical work
environment. Keep the system in good condition by maintaining the
following operating conditions:
• The chassis should ideally have a 6-inch (15-cm) minimum air clearance
above the top. The first line of Table 1-1 shows the side clearances
required. If the chassis is positioned under a desk or other equipment
and the top air clearance is less than 6 inches (15 cm), make sure that
the side air clearances are at least as great as those listed on the second
line of Table 1-1.
• The chassis should be kept in a clean, dust-free location to reduce
maintenance problems.
• The available power should be rated for computer operation.
• The chassis should be protected from harsh environments that produce
excessive vibration, heat, and similar conditions.
a. Side as viewed from the front of the chassis.
Table 1-1 Required Air Clearances for the Deskside Chassis
Top Clearance Left Side
a
Right Side
a
Front Back
More than 6” 3” (8 cm) 6” (15 cm) 6” (15 cm) 6” (15 cm)
Less than 6” 6” (15 cm) 10” (25 cm) 8” (20 cm) 8” (20 cm)