Silicon Graphics 10-Gigabit Ethernet Network Adapter, Руководство пользователя

Страница: 22 / 38

2: Connecting the Adapter to a Network
2. Insert the LC connector on one end of the fiber-optic cable into the adapter, as
shown in Figure 2-1. Ensure that the connector is inserted completely into the jack.
Note:
If the network connects to an Ethernet switch, consult the operating
manual for the switch to ensure that the switch port is enabled and configured
correctly and as the correct adapter type
(10GBASE-SR
).
3. Insert the connector on the other end of the fiber-optic cable into the connector on
the Ethernet switch, or another computer system (as appropriate).
Figure 2-1 shows the connector.
Fiber-optic
connector
Figure 2-1 Fibre Optic Connections
6 007–4669–002