Silicon CPV plc
Akhter House, Perry Road, Harlow, Essex, CM18 7PN, UK
Tel +44 (0) 1279 821200 Email [email protected]
Page 5 of 32
Tools Required for Installation and Maintenance
The table below details the key tools that will be needed to install a
Silicon CPV Solar Street Light. It is assumed that the appropriate height
pole has already been installed. (Please refer to pole sizing section for
pole details)
Item Description
Qty
1
Small flat bladed screw driver for light switch selector
1
2
Mains Operated Electric or Battery Drill
1
3
Screwdriver set – pozi drive
1
4
Set of HSS Drill bits (must include 4.5mm for light
body to pole fixing)
1
5
Tape measure
1
6
Long nose pliers
1
7
Side Cutters
1
8
Sprit or laser Level
1
9
Cherry Picker or equivalent access platform for
installation of Solar Light
1
10
Appropriate Personal protective equipment (PPE) that
conforms to local health and safety legislation
1
11
Digital Multi-meter
1
12
Electrical insulation tape
1
13
Security Bit Screwdriver Set (Torx Button Head TX25)
1
Note: Please be aware that no tools are provided with the product
