13
140-00217-100
With this configuration, EVK board bootup in JTAG mode that you can flash and debug custom
firmware. To run custom firmware, see Section 9 below.
6.2
Host PC FTDI Driver for JTAG
1. Download
zadig-2.4.exe
from the download link (Section 2.2.7 above.)
2. Connect
USB1 and USB2 of EVK board
to
Host PC
with
USB cables
and
Gender Changer
.
3. Start
zadig-2.4.exe
.
4. From top menu, enable
Options > List All Devices
and look for
Dual RS232-HS (Interface 0)
.
5. Select
WinUSB
from the list and click
Replace Driver
button.
7.
Build Sample Demo Project: QCLI_demo
7.1
Import QCLI_demo Project to Eclipse IDE
1. Right click on
Project Explorer
and select
Import…
to open
Import
dialog window.
