Silex technology SX-BR-4600WAN, Руководство пользователя

Страница: 92 / 100

86
SX-BR-4600WAN User's Guide
Advanced Configuration
LAN Interface
Details Configure the physical network type. Usually, "
AUTO
" is used.
Range
AUTO / 10BASE-T-Half / 10BASE-T-Full / 100BASE-TX-Half / 100BASE-TX-Full /
1000BASE-T-Full
Default Value
AUTO
Note
If a LINK LED on the connected device does not light on when SX-BR-4600WAN
is powered on, change the network type to that of the connected device.
Network Device Address
Details
Set the Ethernet Address of the network device to be connected to a LAN port
of the SX-BR-4600WAN.
Range
MAC address
Default Value
(None)
Note
In most cases, it is recommended to leave this field blank, as the SX-BR-
4600WAN automatically detects the Ethernet Address from the network packets
sent from the connected device.
Client Mode
Details Set the operating mode.
Range
Single Client Mode / Multi-Client Mode
Default Value
Single Client Mode
Note
Select Single Client Mode to bridge only one device connected to a LAN port
of the SX-BR-4600WAN. In Single Client Mode , not only TCP/IP but various
communication protocols can be used.
Select
Multi-Client Mode to bridge several devices using a HUB on the LAN
port of SX-BR-4600WAN. In Multi-Client Mode , only TCP/IP(IPv4, IPv6) protocol
can be used.
IEEE 802.11g Ad hoc Mode
Details
Allows high speed communication between the IEEE802.11g Ad hoc
compatible devices, when Ad hoc mode is used.
Range
ON/OFF
Default Value
ON
Note
If a device incompatible with the IEEE802.11g Ad hoc is included to your
network, the communication may become unstable. In such a case, disable this
function.