Silex technology SX-BR-4600WAN, Руководство пользователя

Страница: 55 / 100

4. How to Configure SX-BR-4600WAN
49
3.
The SX-BR-4600WAN and the Access Point will start to communicate each other.
The wireless configuration is successfully completed when the STATUS LED turns on or
blinks.
Failure:
Flashes rapidly
WLAN
STATUS
WLAN
STATUS
Success:
Turns on or blinks
- It may take up to 2 min to finish the wireless configuration depending on your environment.
- If the wireless configuration failed, the WLAN LED will flash rapidly for 10 sec.
In such a case, read the instructions carefully and start from
1
again.
- To change the PIN code, see Checking a PIN Code .
Note
If you plan to use the PC wirelessly (the one you have been using for this configuration),
restart the PC. To use the other non-wireless device wirelessly, turn off the SX-BR-
4600WAN and the PC, and connect the SX-BR-4600WAN to the non-wireless device
using a network cable.
For details, refer to
Connecting Non-wireless Devices
in the next page.