30
AP-100AH User's Manual
4.
List of Functions
This chapter explains the AP-100AH functions.
4-1. DHCP Client
RFC2131/RFC2132 is supported to get an IP address, subnet mask, gateway address, DNS server
address, and a default domain name from the DHCP server. To set an IP address with DHCP, a
work station where the DHCP server is operating is required.
•
When the DHCP client setting is "DHCP", address acquisition performs every 30 seconds
when a DHCP server is not present in the environment.
•
When the DHCP client setting is "AUTO", the configured IP address will be used if an
address is not obtained when a DHCP server is not present in the environment.
•
When the DHCP client setting is "AUTO" and IP address is obtained from a DHCP server,
the configured IP address will not be used even when the lease period is expired, and this
product tries to obtain an address from DHCP server.
DHCP client operates for the wired interface on the AP-100AH.
4-2. Network Address Translation (NAT)
