Silent Guitar SLG200N Скачать руководство пользователя

Страница: 12 / 16

To prevent unnecessary power consumption, the instrument is equipped with an Auto

Power Off Function that automatically switches the power off if the instrument has not been

played for more than 30 minutes. If the Auto Power Off function switches the instrument’s

power OFF, simply press the power switch again to continue using the instrument.

* The Auto Power OFF function is enabled when shipped from the factory.

Confirming the Auto Power Off Function’s Enabled/Disabled Status

• When the Auto Power Off Function is enabled, the instrument will directly enter the Play mode (LEDs

do not flash) when switching the power ON (press the power switch or connect a cable to the LINE

OUT jack).

• When the Auto Power Off Function is disabled all Tuner LEDs will light then go out one by one

before entering the Play Mode when switching ON the power.

Changing the Auto Power Off Function Enabled/Disabled Setting

With the power switched ON (Play Mode), press and hold the TUNER switch for more than two sec-

onds to enable the function.

• Performing the operation described above when the function is enabled will cause all tuner LEDs to

light and then turn off one by one and disable the function.

• Performing the operation described above when the function is disabled will cause the tuner LEDs

to light one by one and enable the function.

About the Auto Power Off Function

Play Mode

Lights

Play Mode

Auto Power Off

Function disabled

Auto Power Off

Function enabled

Содержание SLG200N

















Результаты поиска

Содержание SLG200N

Отзывы:

Похожие инструкции для SLG200N

Бренды по названию

Популярные бренды

Silent Guitar SLG200N, Руководство пользователя

Результаты поиска

Содержание SLG200N

Отзывы:

Похожие инструкции для SLG200N

Бренды по названию

Популярные бренды