IM_FULL_55SL_REV_B
14
FEATURE “B” PROGRAMMING
1. Turn the Ignition ‘switch
“ON/OFF” 3 Times
and stay in
“OFF”
position.
2. Push the Valet switch
4
times
(holding in on the 4th push) until
a long chirp is heard
and then release
the valet switch. You are now in the Alarm feature
“B”
programming mode.
Press and release the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp /
LED One Pulse
Factory Default Setting
Two Chirps /
LED Two Pulse
Three Chirps /
LED Three Pulse
Four Chirps /
LED Four Pulse
1
Door Lock Before Start
Door Lock After Start
Door Lock Before &
After Start
Without this Feature
2
Ignition Controlled Door
Locks & Unlocks
With Ignition Controlled
Door Locks Only
With Ignition
Controlled Door
Unlocks Only
Without Ignition Controlled
Door Locks & Unlocks
3
0.8 Second Door Lock
& Unlock
3.5 Second Door
Lock & Unlock
0.8 Second Lock,
0.35 Second Unlock
0.8 Second Double Lock,
0.8 Second Double Unlock
Five Chirps
= 0.8 second Lock, double 0.8 second. Unlock
Six Chirps
= Double 0.8 second Lock, 0.8 second Unlock
Seven Chirps
= Door lock with “Comfort Feature”
Eight Chirps =
DBI Two-step unlock ( DBI ONLY
)
**
Nine chirps =
DBI Unlock ALL doors ( DBI Only )**
**
Select either of these options when using Two Way Data Bus Interface Only.
For use with FORTIN & ADS Compatible data modules and/or Telematics Module.
4
White/Blue= 1 Pulse
Start (-) Trigger input
White/Blue=
2 Pulse start
(-) Trigger input
White/Blue=
3 Pulse start
(-) trigger input
5 +
ADS DBI Data protocol
Fortin DBI Protocol
6
+
Press button =
Activate Remote Start.
Press - button
twice = Activate
Remote Start.
Exit:
Turn Ignition to
“ON”
position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
