Silego Technology Inc.
Page 21 of 41
08/15/17
GreenPAK Advanced
Development Platform
To test this project we will use the following tools:
• Signal generator. Signal generator is applied to VDD pin to power GreenPAK chip
• Logic generator. Logic generator serves as clock source
• Button is a software simulation of the real button. It switches PIN between VDD and GND signal levels
• Inverted buffered LED
• Buffered LED
Signal generator is presented as a power source for GreenPAK chip. It's configured to output source constant 3.3 V.
The purpose of the logic generator is to provide clock pulses for the Counter block.
It is configured for 10 Hz clock source as
shown in the
Figure 19.
Figure 17. Signal Generator Connected to VDD Pin
Figure 18. Signal Generator Settings