Silca Triax Pro, Руководство по эксплуатации

Страница: 22 / 114

4 MACHINE DESCRIPTION
TRIAX PRO is an electronic key-cutting machine used to:
a. CUT KEYS (in ferrous material in general; brass, silver nickel, etc.) by:
• DIMPLE cutting.
• TRACK cutting.
• Special cutting (e.g. Tibbe with option)
• Pipe key cutting (with option)
ATTENTION: anodised aluminium dimple/laser keys, plastic keys or any other key without electrical con-
ductivity CANNOT BE decoded! For these types of keys digit the cuts directly or enter the indirect code if
the SSN in use allows it.
b. ENGRAVE keys and medals:
• The keys and medals must be in metal.
• Engraving cannot be carried out on other materials (wood, paper, plastic, ceramics…).
•
The maximum dimensions of the subject to be engraved are: 38x40 mm (see Fig. 24).
4.1 REGULATION AND USE
ATTENTION: to ensure that the Z axis works properly the calibration plate
must be kept constantly clean with the brush provided in order to avoid
pollution by swarf. A false contact due to swarf will produce a Z cut (depth)
of the wrong measurement.
ATTENTION: do not apply excessive pressure in order to grip the key in the clamp. We also recommend
holding the key down well in the clamp during the closing operation, in order to avoid bending, bad
alignment or parts that are not properly seated on the clamp surface (Fig. 13).
Fig. 13
ATTENTION!
Eliminate swarf from the
calibration plate and clamp.
Operating manual TRIAX PRO
Copyright Silca 2016
16