Silca Quattrocode, Руководство по эксплуатации

Страница: 32 / 59

Operating manual - English QUATTROCODE
32 Copyright Silca 1999
Test 305: B axis photocell (supplementary - optional)
The B axis is provided for the future use of additional devices for the Quattrocode, such as special
clamps which will be controlled through the B connection on the right-hand side of the machine (in
the standard version of the Quattrocode this function is not activated).
Test 306: cutting tool motor (slow speed)
(make sure there is a cutting tool in the spindle so that the chuck is locked).
- With the motor off the display will show:
<TEST 306>
Hold down the key to start the motor.
When the key is released the motor stops immediately.
If the motor will not start, contact Silca After-Sales Service.
Test 307: cutting tool motor (high speed)
(make sure there is a cutting tool in the spindle so that the chuck is locked).
WARNING: for this TEST the protective shield must be lowered.
- With the motor off the display will show:
<TEST 307>
Hold down the key to start the motor.
When the key is released the motor stops immediately.
If the motor will not start, contact Silca After-Sales Service.
START
START