OMNIA MAX / OMNIA W MAX
Clamps for bit/double bit and pump keys
The clamps (M) (M1) comprise two self-centring jaws which ensure perfect hold on the shafts of bit/double bit and
pump keys (Fig.4).
Fig.12
The carriage is found in the machine packing as a separate item (see chap.5.2 and chap.5.5).
NOTE: the Omnia MAX/Omnia W MAX carriage for double bit keys can be used alone or connected to
the Omnia MAX/Omnia W MAX carriages for vertical cuts (see chap.5.5.7 OMNIA MAX / OMNIA W MAX:
solution with a SINGLE CARRIAGE).
Clamps for vertical cuts (only Omnia MAX and Omnia W MAX)
The clamps (J) (J1) are designed to ensure perfect hold on the shafts of bit keys with vertical cuts.
Fig.13 - Clamps for vertical cuts Omnia MAX
Fig.14 - Clamps for vertical cuts Omnia W MAX
Clamps
for vertical cuts Omnia W MAX:
the knobs are gauged so that they do not exert too much pressure for
closing (if pressure is toohigh they only idle), which would damage the key and the parts of the clamp (including
the knob).
The carriage is found in the machine packing as a separate item (see chap.5.2 and chap.5.5).
NOTE: the Omnia MAX and Omnia W MAX carriages for vertical cuts can be used alone or connected to
the carriage for bit keys (see chap.5.5.7 OMNIA MAX / OMNIA W MAX: solution with a SINGLE CARRIAGE).
Operating Manual
OMNIA / OMNIA 650rpm / OMNIA MAX / OMNIA W MAX
Copyright Silca 2014
12
