WARNING!
It is important that this guide is read and fully understood before
attempting installation or commissioning of the instrument.
Instructions appearing in this document, and current safety
legislation, must be observed to ensure personal safety and to
prevent damage to the instrument or equipment connected to it.
The instrument should be installed, commissioned and operated
only
by suitably qualified and authorised personnel.
Page 1
Safety and EMC information
Safety: EN61010 -1
Immunity: EN50082-1
Emissions: EN50081-1
CE certified
The specifications for the instrument must not be
exceeded. If the instrument is used in a manner not
specified, the protection provided by the instrument may
be compromised.
The instrument must be installed in an enclosure that
provides adequate protection against electric shock.
Ensure that power to the instrument is switched off and
signal wiring isolated from hazardous voltages before
carrying out installation or maintenance.
The instrument is designed for installation in a clean, dry
environment (Pollution degree 1).
Stroud Instruments Ltd strongly recommends that repairs
and re-calibration work are done on a return to factory
basis in order that our quality standards, product
specifications and safety precautions are not
compromised.
The instrument is double insulated
Note: Clean with a moist cloth - USE NO SOLVENTS.
