Siko WV58MR, Перевод оригинальной инструкции по установке

Страница: 23 / 28

WV58MR
Accessory connector English
WV58MR · Date 07.10.2020 · Art. No. 88752 · Mod. status 047/20
23
Maintenance
With correct installation according to chapter 4 the absolute encoder
requires no maintenance. The absolute encoder has received lifetime lub-
rication and need not be lubricated under normal operating conditions.
Disposal
The absolute encoder's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the absolute encoder must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
8 Accessory connector
(not included in the scope of delivery)
8.1 Straight matting connector M12
Advice
` Strand cross sections of screened lines max. 0.75 mm² / cable feed-
through: ø6-ø8 mm.
• Accessory SIKO art. no. "84109" (socket contact 5 pin).
Mounting ( Fig. 3 )
1. Mount seal to screen ring
1
.
2. Slip parts
1
to
6
over outer cable.
3. Strip cable sheath, isolate conductor.
4. Shorten and turn down screen.
5. Clamp wires into socket
7
(follow connection diagram chapter
4.2
).
6. Mount parts
2
...
6
. Place screen around screen ring
4
.
7. Screw pressure screw
1
on coupling sleeve
5
.
NOTICE