Siklu EtherHaul-1200F, Руководство по установке

Страница: 44 / 55

EH-1200F Installation Manual
Page 44
3.4.4 Quick Configuration: Step 4
– Network
Figure 3-8 Quick Config Page: Step 4
– Network
This section allows configuring the following parameters:

IP Address
The EtherHaul supports up to four IP addresses that can be associated with different
VLANs. IPv4 or IPv6 can be configured. IP addresses may also be acquired by DHCP.
o
# - Index (1-4)
o
Type – Static or DHCP
o
IP Address – Default is 192.168.0.1
o
IP Prefix Length – Default is 24 (equivalent to Mask of 255.255.255.0)
o
VLAN – 0 (not defined, meaning the IP is not associated with specific VLAN)
Click the Trash icon to clear an IP. Note you cannot clear the IP address you used to log
in to the system.

Default Gateway

SNMP Managers
Up to five managers that will receive SNMP traps can be configured (SNMPv2c or
SNMPv3).
o
# - Index (1-5)
o
IP Address – Destination IP Address
o
UDP Port – port number for sending traps