SIKA TP 17 *** M Series, Руководство по эксплуатации

Страница: 34 / 44

Warranty and Repairs TP 17 / TP M / TP Multi
- 34 - © SIKA • Ba_TP17-TPM-Multi_en.doc • 01/2014
11 Warranty and Repairs
The calibrator/micro calibration bath is under guarantee for 12 months as from the date of de-
livery for construction errors or material defects. The guarantee is limited to repairs or replac-
ing the calibrator / micro calibration bath.
SIKA also provides an extra 5-year guarantee for all calibrators which are calibrated and in-
spected annually by the SIKA-DKD laboratory.
Warranty shall not apply if the calibrator / micro calibration bath is opened and unauthorized
repair work is carried out or if the calibrator / micro calibration bath is not used for its intended
purpose or installed incorrectly.
If the calibrator / micro calibration bath malfunctions during or after the warranty period, al-
ways contact the SIKA “Sales Dept.” before sending the calibrator / micro calibration bath for
repairs.
The defective calibrator / micro calibration bath incl. details of the occurred fault can be sent
freight paid to SIKA, unless other agreements have been made.
12 Recalibrating
The calibrator / micro calibration bath is adjusted and tested with measuring equipment in ac-
cordance with recognized national standards prior to delivery.
The calibrator / micro calibration bath should, depending on the application situation, be in-
spected at appropriate intervals on the basis of DIN ISO 10 012. We recommend you to re-
turn the calibrator / micro calibration bath to SIKA at intervals of max. 12 months or approx.
500 operating hours for recalibration and readjustment.
Recalibration is based on the directive DKD R5-4 of the German Calibration Service. The
measures described here are applied and considered during recalibration.
13 Decommissioning and Disposal
Decommissioning:

Allow the instrument to cool down (

§ 8 "Cooling Down of the Metal Block / Liquid
Bath").

Switch off the calibrator / micro calibration bath and disconnect the mains plug.

If necessary, remove any existing calibration liquid from the micro calibration bath
(

§ 9.2 "Cleaning").
Disposal:
IMPORTANT NOTICE!
Dispose of the silicone oil in accordance with the specifications on the safety data sheet.
NO HOUSEHOLD WASTE!
The calibrators of the series TP 17 / TP M / TP Multi consist of various different materi-
als. It must not be disposed of with household waste.