EC RTD.2
Safety instructions
Technical changes reserved
- 23 -
2
Safety instructions
Before you install the EC RTD.2, read through this operating manual carefully. If the in-
structions contained within it are not followed, in particular the safety guidelines, this
could result in danger for people, the environment, and the device and the system it is
connected to.
The EC RTD.2 corresponds to the state-of-the-art technology. This concerns the accuracy,
the operating mode and the safe operation of the device.
In order to guarantee that the device operates safely, the operator must act competently and
be conscious of safety issues.
SIKA provides support for the use of its products either personally or via relevant literature.
The customer verifies that our product is fit for purpose based on our technical information.
The customer performs customer- and application-specific tests to ensure that the product
is suitable for the intended use. With this verification all hazards and risks are transferred to
our customers; our warranty is not valid.
Qualified personnel:
The personnel who are charged for the operation and maintenance of the EC RTD.2 must
hold a relevant qualification. This can be based on training or relevant tuition.
The personnel must be aware of this operating manual and have access to it at all times.
General safety instructions:
Do not operate the instrument in the presence of flammable gas, explosive gas or vapour.
Never apply more than 30 V between any two terminals, or between any terminal and
ground.
The split case may not to be removed, unless by qualified technicians.
To clean the device, periodically wipe the case with a damp cloth and detergent; do not
use any corrosive solvents.
For optimal accuracy, allow the instrument to warm up for 5 minutes before operating.
Special safety instructions:
Warnings that are specifically relevant to individual operating procedures or activities can be
found at the beginning of the relevant sections of this operating manual.
