SIIG SoundWave 7.1 PCI, Быстрое руководство по установке

Страница: 5 / 12

5
Driver Installation
Windows 98SE/ME/2000/XP
1. After installing the board boot up Windows.
2. At the new Add New Hardware Wizard , click
Cancel .
3. Insert the software CD, Autorun should start the
installation automatically. If Autorun does not
start, click Start , Run . Type X:\Auto.exe , then
click OK . (Replace X: with the drive letter of your
CD-ROM)
4. Click Install Xear 3D Driver , then follow the on
screen instructions to complete the installation.
Windows Server 2003
1. After installing the board boot up Windows.
2. At the Found New Hardware Wizard , insert the
software CD. Select Install the hardware
automatically (Recommended) , then click Next .
3. Click Finish .
4. Click Start/Settings/Control Panel/Sounds and
Audio Devices .
5. Check Enable Windows Audio option , then
click OK . Click Yes to restart your system.
To Verify Succesfull Driver Installation
1. Go to Device Manager to verify successfull driver
installation.
Win98SE/ME: From the main desktop, right click
My Computer , click Properties , then click Device
Manager .