12
8. When
asked
Are you sure to exit (Y/N)?
, press
Y
to
exit and reboot.
Note
: The hard disk will show up as
Contiguous
in
the SATARAID5 GUI.
JBOD Drive Setup
This RAID Array combines the full capacity of two or
more hard drives to form one logical drive. Since this
configuration will destroy all existing data on each hard
drive, use blank or new hard drives or back up the
existing data before connecting to the raid controller.
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted
to enter the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then
press
Enter
.
3. Select
Concatenation
, then press
Enter
.
4.
Select the number of drives, then press
Enter
.
5.
Select each hard drive, then press
Enter
in succession.
6. When
asked
Are You Sure (Y/N)?
, press
Y
to accept.
Note
: In the RAID BIOS screen, under
Logical Drive
,
SiI Concatenation
and the size of the logical drive
will appear.
7. Press
Ctrl+E
to exit the BIOS.
8. When
asked
Are you sure to exit (Y/N)?
, press
Y
to
exit and reboot.
Note
: When multiple drives are combined using
JBOD
, each hard disk drive will appear as
Concatenated
in the SATARAID5 GUI.
Содержание Serial ATA 4-Channel PCI
Страница 29: ...29 Blank Page...
Страница 30: ...30 Blank Page...
