SIIG SC-000081-S1, Быстрое руководство по установке

Страница: 17 / 20

17
FAQ
If you encounter a problem while using the
SATA RAID 5/0 Bay Enclosure , check this section for help.
1. When I lock a drive carrier with a disk drive in place,
the red disk activity indicator turns on and an alarm
beep sounds. Why?
• Make sure you firmly connect the SATA connector
of the HDD to their counterparts inside the drive
carrier and try again. If this does not solve the
situation, go to next suggestion below.
• Change the disk drive with a new one and try again.
• Exchange the top and bottom drive carriers and try
again to determine if the carrier itself is faulty.
• If all of the above steps fail, contact SIIG Technical
Support.
2. How can I turn off the alarm beep sound when there
is a hard disk failure?
• Unlock the drive carrier of the failed disk. This will
turn off the alarm beep sound.