background image

PRODUCT NAME

MODEL NUMBER

                 Low Profile PCI I/O

LP04xx

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device  complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:  (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference  in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio and
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio or TV technician for help

Caution:

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA  94538-3152

SIIG and SIIG logo are registered trademarks of SIIG, Inc.  Microsoft, Windows and Windows

NT are registered trademarks of Microsoft Corporation.  Pentium is a registered trademark of

Intel Corporation.  Other names used in publication are for identification only and may be

trademarks of their respective companies.

November, 2000           Copyright ©2000 by SIIG, Inc. All rights reserved.

Содержание Low Profile PCI I/O









Отзывы: