SIIG FireWire 800 DV Kit, Быстрое руководство по установке

Страница: 9 / 12

9
Connecting a DV Camcorder
Before plugging in your DV camcorder, verify that the
Microsoft FireWire 400 driver has been successfully
installed in your system, see ubSwitch Utility on page 8,
then follow the steps below.
1.
Connect the 4-pin connector of your FireWire 400
DV cable to your camcorder.
2. Connect the 6-pin connector of the DV cable to the
FireWire 400 port.
3. Power on the DV camcorder. The camcorder should
appear in Device Manager .
To Verify DV Camcorder Setup
1. Right click My Computer , click Manage , then click
Device Manager .
2. Double click Imaging Device(s) . Microsoft DV
Camera and VCR or DV Camcorder should be
displayed.
Connecting 1394 Devices
General driver installation steps are provided below.
Please review your device's user manual for more details.
Windows 2000
1. At the Found New Hardware Wizard, click Next .
2. Select Search for a suitable driver... , then click Next .
3. Uncheck all check boxes, then click Next .
4. Click Next , then click Finish .