8
ubSwitch Utility
In order to use a DV camcorder with this controller,
Microsoft's FireWire 400 driver must be installed in the
system. We have supplied an easy to use utility that
allows switching between Microsoft's driver and the
FireWire 800 driver.
Before using this utility, unplug all
devices from the FireWire 800 PCI
board
.
1.
Click
Start
,
Programs
,
Unibrain ubcore
,
Tools
then
ubSwitch
.
2.
Right click the
ubSwitch
icon located in the system
tray by the clock.
3.
Click the 1394 adapter
that you want to switch, then
click on
Microsoft 1394 Drivers
.
Note
: If your system has multiple 1394 adapters
installed, make sure that you click on the 1394
adapter that the camcorder will be plugged into.
4.
Windows will display an information box when the
driver is ready for use. It may take a few seconds for
this box to appear. Wait for this box to appear then
connect your DV camcorder.
Note
: To switch back to the FireWire 800 driver,
follow the same procedures, but in step 3 instead of
clicking on
Microsoft 1394 Drivers
, click on
Unibrain
1394 Drivers
.
