3
Hardware Installation
Note:
For low profile systems, replace the currently
mounted bracket with the spare low profile bracket.
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer’s case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer and any
other connected peripheral devices. Unplug the
computer's power cord.
2.
Remove your computer’s cover and install the card
in an available PCI slot.
3.
Push the card down firmly, but gently, until it is
well seated.
4.
Connect an available 4-pin power connector from
the system power supply to the
Power Connector
on the
FireWire 800 3-Port PCI
(see
Figure 1
, on page
2). This connection is optional, but recommended
for reliable power output.
5.
Secure the card and replace the cover.
