SIIG FireWire 800 3-Port PCI, Быстрое руководство по установке

Страница: 10 / 12

10
ubSwitch Utility (Windows only)
In order to use a DV camcorder with this controller,
Microsoft's FireWire 400 driver must be installed in the
system. We have supplied an easy to use utility that
allows switching between Microsoft's driver and the
FireWire 800 driver. Before using this utility, unplug all
devices from the FireWire 800 3-Port PCI.
The steps, taken from Windows XP, may be different for
other Windows operating systems.
1.
Click Start , Programs , Unibrain ubcore , Tools then
ubSwitch .
2. Right click the ubSwitch icon located in the system
tray by the clock.
3. Click the 1394 Adapter that you want to switch, then
click on Microsoft 1394 Drivers .
Note : If your system has multiple 1394 adapters
installed, make sure that you click on the 1394
adapter that the camcorder will be plugged into.
4. Windows will display an information box when the
driver is ready for use. It may take a few seconds for
this box to appear.
Note : To switch back to the FireWire 800 driver,
follow the same procedures, but in step 3 instead of
clicking on Microsoft 1394 Drivers , click on Unibrain
1394 Drivers .