2
Maximum Fiber Optic Cable Lengths:
100Base-FX (multi-mode) network allows 512-bit time delay between
any two-node stations in a collision domain.
Switching Hub Fiber Cable:
Full-duplex
Node to Hub:
2000 m
(multi-mode)
Hub to Hub:
2000 m
Half-duplex
Node to Hub:
412 m
(multi-mode)
Hub to Hub:
412 m
Class II Hub(Half-duplex) Fiber Cable:
FX(Fiber)
Node to Node:
205 m
(multi-mode)
Node to Hub:
100 m
Hub to Hub:
5 m
Unpacking
Before setting up your FiberOptic Transceiver, verify that the following
items are included in the packaging carton:
• FiberOptic Transceiver
• This Quick Installation Guide
Please notify your dealer if any item is damaged or missing.
2-1 Installing the FiberOptic Transceiver
1. Verify that the power for the remote MII device is OFF.
2. Connect the MII (male, SCSI II 40-pin) connector on the
FiberOptic Transceiver to the remote MII device's port.
ST/SC Fiber Optic
Connectors
MII 40-pin
Connector
Switch
SW1
100
Fdx
Link
Phy1
Reptr
MII-to-100FX Transceiver
Tx
Rx
FdX
FiberOptic Transceiver