SIIG DP FireWire PCIe, Быстрое руководство по установке

Страница: 3 / 8

3
Hardware Installation
Note : For low profile systems, replace the currently
mounted full height bracket with the included low profile
bracket.
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer. Unplug the
power cord and remove your computer cover.
2. Remove the slot bracket from an available PCIe slot.
3. Carefully align the card to the selected PCIe slot
push the board down firmly, but gently, until it is
well seated.
4. Connect the system power source to the DP FireWire
PCIe Power connector (use the included "Y" split
power cable , if needed).
5. Replace the slot bracket holding screw to secure the
card.
6. Replace the computer cover and reconnect the power
cord.