background image

CyberPro 1S1P is a trademark of SIIG, Inc.
SIIG and SIIG logo are registered trademarks of SIIG, Inc.  Microsoft and Windows are
registered trademarks of Microsoft Corporation.  Pentium is a registered trademark of Intel Corporation.
Other names used in publication are for identification only and may be trademarks
of their respective companies.

February, 2005                 Copyright ©2005 by SIIG, Inc. All rights reserved.

PRODUCT NAME

CyberPro 1S1P

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device  complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:  (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.
6078 Stewart Ave.
Fremont, CA  94538-3152

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer
of I/O connectivity products, including PCI & ISA serial and parallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
Networking, Sound Cards, and other accessories.  SIIG is the premier
one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry.  SIIG products can be
found in computer retail stores, mail order catalogs, and e-commerce
sites in the Americas and the UK, as well as through major distributors,
system integrators, and VARs.

Содержание CyberPro 1S1P













Отзывы: