background image

PRODUCT NAME

Cyber 2S1P PCIe

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules.  Operation is subject
to the following two conditions:  (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.
6078 Stewart Avenue
Fremont, CA  94538-3152, USA
Phone: 510-657-8688

Cyber 2S1P PCIe is a trademark of SIIG, Inc.  SIIG and the SIIG logo are registered trademarks

of SIIG, Inc.  Microsoft and Windows are registered trademarks of Microsoft Corporation.  All

other names used in this publication are for identification only and may be trademarks of their

respective owners.

November, 2010                        Copyright © 2010 by SIIG, Inc.  All rights reserved

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,

and legacy I/O adapters) that bridge the connection between Desktop/

Notebook systems and external peripherals.  SIIG continues to grow by adding

A/V and Digital Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features,

and are backed by an extensive manufacturer warranty.  High quality control

standards are evident by the overall ease of installation and compatibility of

our products, as well as one of the lowest defective return rates in the industry.

SIIG products can be found in computer retail stores, mail order catalogs,

through major distributors, system integrators, and VARs in the Americas and

the UK, and through e-commerce sites.

Содержание Cyber 2S1P PCIe













Отзывы: