13
(1) Firmware Update
Before you start to update, please make sure you have secured the
connection between your computer COM port and the device
Control MCU firmware update
1. Click the ”Load File” button to select the file
2. Click the “Break“ button to switch to firmware update mode
3. Power cycle your device to the boot-loader entry
4. Click the “Start“ button and the firmware will start to update
5. After updating, please power cycle the device
Ethernet MCU firmware update
1. Before you start to update Ethernet MCU, please make sure
you have secured the Ethernet port connection between your
Ethernet and the device
2. Click the “Load File“ button to select the file
3. Click the “Start“ button and the firmware will start to update
4. After updating, please power cycle the device
MISC
You can change the default diagram (TV Wall diagram) on this
software.
*The file suffix of picture should be .bmp.
1. Click “Load Graph“ button to select the graph.
2. After loading the graph step, please click “Tick“ button to write
this graph into device.
Factory reset
(factory reset function cannot use when using Ethernet mode)
1. Click “FACTORY RESET“ button to do factory default reset.
2. This default reset process will take about 5~15 seconds
3. After pop-up a dialog indicates complete, please restart this machine
