SIIG AV-GM08R3-S1, Руководство пользователя

Страница: 15 / 25

13
OPERATION SOFTWARE
System Requirement and Precautions
1. The AV-GM08R3-S1 provides a software control program which runs under Microsoft Windows
98, 2000, XP through the interface of USB interface.
2. Before you click on the icon of the software, make sure you have secured the connection
between your computer COM port and the AV-GM08R3-S1, also switched on the AV-GM08R3-S1
with green LED light.
3. The AV-GM08R3-S1 has remote control and software control. To make sure all information
shown in the software is synchronized with those in the device, please click “Connect” to
acquire the latest data from the AV-GM08R3-S1 after you press any key on the remote control.
Instruction of Software Connection
1. Power up the AV-GM08R3-S1 and you can see both red and green LEDs on the front panel blink.
Make sure the serial port USB connection secure.
2. The first step after running the software is to automatically detect if the device responses
correctly through USB port. The process takes 15-20 seconds. If the response is not accurate, a
warning window will show up as the figure below.
The possible reasons causing this failure could be:
●
The AV-GM08R3-S1 is not supplied with power or the AV-GM08R3-S1 enters deep sleep state.
Please check the current status, and reboot the AV-GM08R3-S1.
●
The serial connection through USB is not well established or some other software has taken
the available serial ports. Please make sure the USB cable is well connected and the
available serial port is free to be used by the AV-GM08R3-S1.
●
Com setting is not correct. Please make sure that from Menu → Connector → Setting.