SIIG AV-GM08R3-S1, Руководство пользователя

Страница: 10 / 25

8
Installation Procedures
Unpacking
Remove the AV-GM08R3-S1 from the shipping container and examine it for any signs of
shipping damage or missing items (check with package contents above). All shipping items should
be saved if the product is to be moved or returned for service. Shipping unit back to dealers for
service not in the original box may result in voiding warranty or additional cost.
Placement
The unit uses convection to cool. A fan is not needed, so do not block the sides of this device
or stack another device on the top or bottom of the AV-GM08R3-S1.
Connections
We recommend the highest quality cables for both input and output connections.
1. Switch off the AV-GM08R3-S1 and all devices that you want to connect.
2. Connect a monitor, a projector or other displays that comes with DVI and/or VGA inputs by
using 1 male-to-male DVI (VGA) cable to AV-GM08R3-S1 DVI output (you can connect 2 displays
equipped with DVI and VGA respectively by a DVI to DVI/VGA breakout cable (DDVY01)) .
3. Plug in DVI to DVI/VGA breakout cable (DDVY01) to DVI-IN and plug in VGA to component
breakout cable (VYPBA01) to the VGA connector of the breakout cable.
4. Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout
cable.
5. Connect a device equipped with component video output (YPbPr such as DVD player or camera)
to the 3-RCA jack of the VYPBA01.
6. Connect a device equipped with VGA output (such as laptop) to the VGA connector of the
AV-GM08R3-S1.
7. Connect a device equipped with composite video output to composite input of the
AV-GM08R3-S1.
8. Connect your computer with the AV-GM08R3-S1 by a Mini USB cable and then install the
software.
9. Plug in power adapter cable into 5V DC power jack.
10. Switch on all devices connected and then switch on the video processor and then press “menu”
to display OSD menu.
11. Press down arrow key dropping down sub-menu to select the first channel (Main Channel)
video/graphic source.
12. Once the Main Channel has a video selected, press “exit” key to exit the sub-menu, and then
move right to the next item of OSD menu, which allows you to select the second channel (Sub
Channel).