SIIG AV-GM06Z3-S1, Руководство пользователя

Страница: 9 / 17

~ 8 ~
Main Firmware Update
Note
6
Factory default for
SW Main
is pin#1-
OFF
[

]
, pin#2-
OFF
[

]
.
PLEASE MAINTAIN THIS SETTING AT
ANYTIME FOR REGULAR USE VIA RS-232 CONTROL!
8
Sequence for firmware update
WARNING! [Firmware update only can be done via RS-232 port and connection to PC set at
COM1)
1. Power off the AV-GM06Z3-S1. Execute the firmware update program on your PC via
COM1 port connection to the RS-232 port of the AV-GM06Z3-S1.
2. Set the pin#1 and pin#2 of [
SW Main
]
at
ON
[

]
for firmware update mode.
4. Power on the AV-GM06Z3-S1. The firmware update program should begin this
update sequence automatically. If not, please check the RS-232 connection status
between PC and MA-5188.
5. After the OK message shows up to indicate the firmware update sequence for
designated Block is complete, please turn off the AV-GM06Z3-S1.
7. Set the [
SW Main
]
switch position to Normal Operation Mode.
8. Power on the AV-GM06Z3-S1.
DIP Switch
Position Description
Pin#1 Pin#2
OFF [

] OFF [

] Normal Operation
ON [

] ON [

] For Firmware Update
DIP Switch