SIIG AV-GM06Z3-S1, Руководство пользователя

Страница: 11 / 17

~ 10 ~
Source Side
Method A: Push-in Button
1. Use the switch button on output port to select which port to be changed.
(+) increase (–) decrease
2. Push the switch button on Input channel. The source will be sequentially changed. After
few seconds, the setting will be active.
Method B: IR Remote Control
a. Please press F1 to F6, Enter ( ), and Exit ( ) button to enter IR control mode and
decide which output port to be controlled (see the table below), and wait a few seconds
for the output port LED to show the number of selected output port. Or you can use up
(

) and down (

) button to enter IR control mode and select the output port in
ascending and descending order respectively.
Note
F1 SDI output port #1
F2 SDI output port #2
F3 SDI output port #3
F4 SDI output port #4
F5 SDI output port #5
F6 SDI output port #6
Enter ( ) SDI output port #7
Exit ( ) SDI output port #8
Up (

)
Switch output port in ascending
order
Down (

)
Switch output port in descending
order
b. Use left (

) or right (

) button to select input source as indicated by the LED display on
the front panel for the input channel. The setting will be active once the channel switch
command is set after a couple seconds.
Note
Right (

) button to switch input source in ascending order (1, 2, 3, 4, 5, 6, 7, 8, 1, ...)
Channel Control