SIIG AV-GM06M3-S1, Руководство пользователя

Страница: 8 / 17

6
HARDWARE INSTALLATION
Broadcasts HDMI signals up to 64 remote displays with a local port
1. Turn off all devices, including sources and displays.
2. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI INPUT port.
3. Connect an HDMI receiver (such as a TV monitor) to the HDMI OUTPUT port.
4. Connect the CAT-5/5e/6 OUTPUT port the receivers (CV-735 or CV-715s) via Cat-5/5e/6 cables to
each HDMI Signal OUTPUT port.
5. Connect the local HDMI source to each group.
6. Plug in AC power supply.
7. Power on the HDMI source device.
8. Power on the HDMI displays.
EDID LEARNING
1. Please connect the display which the user want to learn EDID from, to the Input 1 of the 5 main
inputs via HDMI cable.
2. Set the DIP switch position pin 1 at ON [ ].
3. Please reboot the AV-GM06M3-S1 and wait for 30 seconds. Then the EDID learning sequence will
be completed after the 30 seconds.
4. Resume the installation (see Hardware Installation section for more detail).
Step7 and step8 is important. Some monitors will automatically be set to Power Saving. They
keep this mode even the signal appears.
Set the DIP switch pin 1 at OFF [

] will erase the EDID profile learned from the display and
restore the default EDID profile. So please do not dial the pin 1 back to OFF [

] unless you
want to use default EDID profile or learn new EDID from different HDMI display.