2
Layout
Figure 1: Rear Panel
•
Status LED
: Indicates the status of the splitter.
Green LED means the transmission signal is detected
•
HDMI In
: Connect your HDMI source here
•
HDMI Out 1 & 2
: Connect your HDMI displays here
•
RS-232
: For firmware update use only
•
DIP Switch
: Changes between normal work mode
and firmware update mode. Please keep the switch
down at position
1
for normal work mode. See the
instructions on page 5 for firmware update, if needed
•
Power LED
: Power LED in red light means the
power is on
•
DC In
: Power jack for 5V/4A DC power adapter
DC In
HDMI Out
RS-232
Power
LED
HDMI In
Status
LED
DIP
Switch
