manualshive.com logo in svg

SII LP-1010, Руководство пользователя


Поделиться
Скачать
background image

5-17

▼

Setting parameter items

Chapter 5  "SETUP" Menu

DRAWING PARAM.

This is a parameter group that you need to set plotting conditions.

■

OFFSET MODE

Allows for setting which offset function is used from among MARGIN/

VARIABLE SIZE OFFSET/FIXED SIZE OFFSET.  This setting is

performed on the third hierarchy.

<Parameter (choice input method)>

     : Default value

MARGIN

MARGIN is used as the offset function.  Setting of MARGIN

is enabled.

VARIABLE SIZE

Offset X and Y are used as the offset function.  Offset X and Y

setting is enabled.  Drawing size increases or decreases

depending on the offset value.

FIXED SIZE

Offset X and Y are used as the offset function.  Offset X and Y

setting is enabled.  As the drawing size does not vary

depending on the offset, data may be clipped.  If the drawing

size is not set to the data, offset is performed in the

VARIABLE SIZE mode.

Содержание LP-1010



































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LP-1010

Бренды по названию

Популярные бренды

Загрузить еще бренды