35
ENGLISH
4
Attach the scroller shaft clip.
(1) Slip the scroller shaft clip on the scroller shaft.
(2) Turn the knob to fix the scroller shaft.
Knob
Scroller shaft clip
oll
ll
l
l
l
l
l
l
2
1
5
Install the media roll fitted with the scroller
flanges into the printer roller groove properly.
Printer rear (supply side)
Printer rea
Roller groove
Scroller flange
6
Cap side
Wiper side
Install the flange holders.
7
Remove the protection bar and open the front
cover.
Front cover
Protection bar
8
Move the media edge guards to each side so
that they are not under the media.
Media edge guards
9
Rotate the pressure control knob in the arrow
direction to raise the pressure roller.
Takeup side
Supply side
or
Pressure control knobs
10
Insert the media end into the paper feeder
while smoothing out the media by hand to
prevent wrinkles.
Printer rear
Paper feeder
If it is hard to insert the media end into the paper
feeder due to a curl of the media, interpose an interleaf
and insert the media end under the interleaf as shown
in the figure.
-
Up curl
- Down curl
