SII IP-6600-01 Скачать руководство пользователя страница 13

Страница: 13 / 180

Consumables

1. Always use the recommended consumables (media, ink, etc.).

Failure to follow this instruction may cause poor print quality
or a breakdown.

2. Do not use ink past the date of expiration as this may cause a

breakdown.

3. Put a used ink cartridge into a plastic bag and dispose of it as an

industrial waste. Observe any regulations for disposal of waste
ink bottles.

4. Do not get ink on your skin or clothes. Wash off any ink

immediately with soapy water.

5. Check waste ink bottle regularly so as not to leak the waste ink.
6. When the waste ink bottle is installed or removed, spread the

stain preventing sheet so as not to stain the floor with spilt ink.

7. Store ink in a dark and cool place.

NEVER store ink in a high temperature or direct sunshining
place.
Doing so, ink may cause characteristic changes.

8. Do not attempt to disassemble ink cantridges.
9. Media for solvent ink on the market can be used for this printer.

Содержание IP-6600-01





















































































































































































Результаты поиска

Содержание IP-6600-01

Отзывы:

Похожие инструкции для IP-6600-01

Бренды по названию

Популярные бренды

SII IP-6600-01, Руководство пользователя

Результаты поиска

Содержание IP-6600-01

Отзывы:

Похожие инструкции для IP-6600-01

Бренды по названию

Популярные бренды