SII DPU-S245, Техническое описание

Страница: 33 / 170

4-6
4.1.3 Function Settings(SWDIP3)
Table 4-3 Function Settings (SWDIP3)
Value
SWDIP Function
0 1
3-8 Paper Mode See table below
3-7
3-6
Print Density See table below
3-5
3-4
3-3
3-2
3-1
Paper Select See table below

Paper Mode selection
Select Paper Mode as the thermal paper in use.
Paper Mode SWDIP3-8
Roll Paper 0
Mark Roll Paper 1
(1) Roll Paper mode
This mode assumes that to print the thermal paper roll.
(a) Process of out-of-paper detection
The printer processes the error operation by lighting the lamp if out-of-paper error detected.
(2) Mark Roll Paper mode
This mode assumes that to print the thermal paper roll with the printed mark at regular intervals on the
back side which to detect paper position. Refer to 2.2 SPECIFIED THERMAL PAPER SPECIFICATION
for the paper roll dimensions.
(a) Process of out-of-paper detection
The printer processes the error operation by lighting the lamp if out-of-paper error detected.