SIGRIST VisGuard 2, Инструкция по эксплуатации

Страница: 48 / 108

Instruction Manual VisGuard 2 Electrical installation
48 14162E/2
5.4.3 Profinet IO: Overview and installation in the SICON

To connect to the Profinet IO, the Profinet IO module must be integrated in the SICON.

The module has an internal switch and provides two Ethernet ports.

The cable is connected directly to the RJ45 plug of the Profinet IO module inside the i n-
strument or via external M12 connectors.
When connecting directly to the RJ45 plug, please note that only plugs with a short
and flat design can be used.

In the Digi.interf. \ General menu, the Modul type must be set to Profinet IO .

In the Digi.interf. \ Profinet menu, the station name, MAC address and connection
status are shown. Moreover, it can be defined here whether the data should only be
read or be read and written.
Figure 21: Overview of the Profinet IO module in the SICON

Fieldbus interface (connection
print) for Profinet IO

Connector for SICON

Ethernet port 1

Ethernet port 2