SIGRIST LabScat 2, Инструкция по эксплуатации

Страница: 46 / 60

Instruction Manual LabScat 2 Troubleshooting
46 12112E/2
10 Troubleshooting
10.1 Pinpointing malfunctions
DETECTABLE MALFUNCTION ACTION
No reading

Check whether the mains device is plugged in.

Check whether the supply voltage is present.

Check whether the instrument is switched on.
Error message in the display

Analyze the error message in accordance with Sec-
tion 10.
The reading is wrong

Ensure that the sample to be measured corresponds
to the operating conditions. Section 2.4

Perform adjustment. Section 9.3

Check whether the photometer is correctly mounted.
Section 4

Ensure that the servicing duties have been performed
according to the servicing schedule. Section 9
Table 2: Pinpointing malfunctions
If the listed measures do not result in the desired results, please consult with customer ser-
vice. Section 11
10.2 Warning messages and effect on operation
Warnings indicate an unusual state.
WARNINGS
If a warning occurs during operation, it has the follow-
ing effects:

The instrument continues to operate; however, the
measuring results must be carefully evaluated. The
cause of the warning message should be remedied
at the next possible opportunity.

When the cause of the warning has been reme-
died, it is automatically deleted.

When the Warning message occurs, the color of
the status display changes to orange and the
warning text describes what the warning is about.
Example: WARNING WATER
SHORTAGE.