01234567890123456789012345678901
---****--------*****************
Used timeslots: 21 Payload: 1344 kbit/s
:
: e1 map del all
E1A: Long-Haul FRAMED Code=HDB3 – ONLINE
0 . 1 . 2 . 3
01234567890123456789012345678901
--------------------------------
Used timeslots: 0 Payload: 0 kbit/s
:
To apply a new timeslot map enter the
dsl retrain
command. It is required to reconfigure the DSL interface upon
changing the map.
Defining of timeslots is possible in framed mode only. In unframed mode
the entire E1 trunk is passed through DSL so the required DSL rate is 2048
kbps or greater.
The error message appears on any attempt to change the timeslot map in
unframed mode:
: e1
E1A: Long-Haul UNFRAMED Code HDB3 – ONLINE
: e1 map add 1-5
Invalid option for unframed mode
:
3.5.5.1 Timeslot 0
The timeslot 0 usually is not included in a list of transmitted timeslots since
it is used for framing synchronization and carries no payload data, but its
transmission demands another 64 kbps of the DSL rate.
40
