SIGNIFY EP0036, Инструкции по эксплуатации

Страница: 12 / 21

AFTER SALES SUPPORT
1300 777 137
12
service@unclebills.com.au
Instructions (cont)
Connecting the Indoor Antenna to a Analogue TV via a Digital Set Top Box
1. Before connecting the power adaptor to the Indoor Antenna, directly connect the
coaxial cable from the Indoor Antenna to the digital set top box.
2. Connect the digital set top box to your TV using a coaxial cable (not provided).
3. Plug the power adaptor into the DC input on the Indoor Antenna. Then, connect the
power adaptor to a mains outlet. You may not need the power adaptor for the Indoor
Antenna if your digital set top box can be operated via the coaxial cable (for more
information, please check the instruction manual provided with your digital set top
box).
4. You can use the remote control of your TV to auto tune the available channels with a
strong enough frequency, usually found in Menu>Channel Settings on your TV. Please
always refer to the TV instruction manual for better instructions on auto tuning your
television.
5. Adjust the Indoor Antenna by moving it around in different directions or mounting it
vertically or horizontally to achieve the best reception position. It is recommended
that you place the Indoor Antenna near a window where the digital TV signal is
strongest.
6. Follow the instructions in Tips and Hints for Finding the Best Signal on page 14 of
this instruction manual to obtain the best possible signal from your Indoor Antenna.
Depending on the strength of your signal, this may take a few attempts.
Indoor Antenna
Digital Set Up Box
Fig. 2