SIGNIFY EP0036, Инструкции по эксплуатации

Страница: 11 / 21

AFTER SALES SUPPORT
1300 777 137 11
service@unclebills.com.au
Instructions
There are two ways you can install the Indoor Antenna; connecting it directly to a digital
TV or to an analogue TV by directly connecting it to a TV set top box. If you choose to
mount the Indoor Antenna to the wall, prior to installation, we recommend testing your
Indoor Antenna in multiple locations until you are satisfied with a position that provides
the best reception. Ensure you try to install the Indoor Antenna away from variables that
could affect the reception (please see
Tips and Hints for Finding the Best Signal on page
14 of this instruction manual for more information).
Connecting the Indoor Antenna to a Digital TV
1. Connect to coaxial cable attached to the Indoor Antenna directly to a coaxial input on
your TV unit.
2. Plug the power adaptor into the DC input on the Indoor Antenna. Then, connect the
power adaptor to a mains outlet.
3. Follow the instructions in Tips and Hints for Finding the Best Signal on page 14 of
this instruction manual to obtain the best possible signal from your Indoor Antenna.
Depending on the strength of your signal, this may take a few attempts.
4. You can use the remote control of your TV to auto tune the available channels with a
strong enough frequency, usually found in Menu>Channel Settings on your TV. Please
always refer to the TV instruction manual for better instructions on auto tuning your
television.
5. Adjust the Indoor Antenna by moving it around in different directions or mounting it
vertically or horizontally to achieve the best reception position. It is recommended
that you place the Indoor Antenna near a window where the digital TV signal is
strongest.
Fig. 1