AFTER SALES SUPPORT
1300 777 137
MODEL: EA0976 PRODUCT CODE: 59237 11/2017
15
NOTE:
The radio station presets will not be retained in memory when the radio is disconnected
from the mains supply.
System
• Factory Reset – Restore the Radio back to its original factory default settings. The settings for
time, date and presets will be deleted from memory.
• SW version – View the current software version of the Radio.
Audio Setting
• Forced mono – Use one single audio channel.
• Stereo allowed – Use two audio channels.
For normal FM radio listening experience, select stereo. If the FM station is weak and noisy, select
Mono to disable stereo detection and improve the quality of the reception. When Stereo is selected
and a stereo signal is being received, the ‘ST’ icon will be shown on the LCD display. When Mono is
selected, there is no indication on the LCD display.
FM Auto-tuning
1. Press the
SCAN
button to perform an auto-tune from 87.5MHz upwards. The first 20 stations
found will be stored in memory as preset stations (labelled as P1 to P20).
NOTE:
Depending on the area the Radio is located, you may need to either adjust the antenna
position or the Radio location to gain better reception.
NOTE:
Stations with a weak signal can only be tuned in manually.
2. To navigate through the all preset stations, press the
or
button to scroll through all preset
stations.
FM Manual-tuning
Rotate the
TUNING
dial clockwise or anti-clockwise to search up or down the FM band by 0.05MHz
increments.
NOTE:
Depending on the area the Radio is located, you may need to either adjust the antenna
position or the Radio location to gain better reception.
Instructions (cont.)
