AFTER SALES SUPPORT
1300 777 137
MODEL: EA0976 PRODUCT CODE: 59237 11/2017
10
Before First Use
Prior to using your Radio, please read all safety and operating instructions thoroughly. Please
ensure you follow the steps below before using this appliance. We recommend you keep the original
packaging for storing your Radio when not in use.
1. Unpack the product but keep all packaging material until you have made sure your new Radio is
undamaged and in good working order. Plastic wrapping can be a suffocation hazard for babies
and young children so ensure all packaging materials are out of their reach.
2. Remove the twist-tie which is securing the electrical cord of the AC/DC power adaptor. Uncoil
the cord and straighten it to remove any kinks. Do not use the product if any part of the AC/DC
power adaptor including the cord or plug is damaged, please call the After Sales Support line for
further advice.
3. Place the Radio on a flat, level surface. Make sure it is not subject to vibrations or movement.
Connecting to Power
1. Once all packaging has been removed and the Radio is located in a suitable position on a stable
and secure surface, plug the power adaptor into a power socket and connect the other end to the
Radio. The DC power input is located on the rear of the unit and is listed as No. 4 on the Rear of
DAB+ Radio Diagram in this manual.
2. Once each end of the power adaptor has been correctly and securely connected, switch the
power socket on. The Radio will automatically enter standby mode.
Turning on the Radio
1. To wake the Radio from standby mode, press and hold the
MODE
button (No. 2 on the Front
of DAB+ Radio Diagram) for approximately 2 seconds. The Radio will automatically enter DAB
mode.
NOTE:
For the first time use, the Radio will enter DAB mode. After 2 seconds, the LCD display will
show ‘Scanning’, indicating that the Radio is scanning for available digital radio stations in your
area. For details on using DAB Mode, refer to page 16.
2. To set the Radio back to standby mode, press and hold the
MODE
button for approximately 2
seconds.
Getting Started
